The many and varied uses for this common material may surprise you

    Chiesa Beato Papa Giovanni XXIII Church, Italy. Photo: Graphic Concrete

    There is a family of materials that can be as little as 13mm thick while still being waterproof. It can be formed into elegant curved shapes in colour. It’s strong enough to withstand frost and compression; for example, in a bridge or a retaining wall. It will not rust or soften in heat. It can be used for prefabrication, involving sophisticated 3-D printing or etching techniques to carry images; or built on-site by unskilled workers. When it is old, it can still be attractively resurfaced and recoloured. And it is useful for conservation and sculptural projects.

    Metal? Plastic? Carbon fibre?  No. You are probably now thinking that this is a family of composites, but what if I told you that the main ingredients are water, cement, sand and crushed stone? That’s right: concrete.

    Ulappatori Tähystäjä, Finland. Photo: Graphic Concrete

    We can have a love-hate relationship with concrete. But the way technology is developing, it is worth keeping it in the designer’s palette. With an eye to the future, I find the work going on at Loughborough University  very interesting. Equally inspirational – but now more accessible – is . With this, based on your own image, retardants are carefully applied via membrane to enable aggregates to be exposed and recreate that image at scale. This opens up interesting possibilities using halftone to install photographs or faux-3D effects on walls in the landscape. Colouring concrete is also getting more imaginative, with . (Although to my mind, all of these need to be done judiciously unless you are already working in a multicolour environment.)

    Other possibilities for boundary treatments are opened up by and for street furniture by .  Or why not install ?

    Rael San Fratello’s Bloom. Photo: Matthew Millman

    If you know of any scintillating uses of concrete in the landscape, get in touch or leave a comment!

    1 COMMENT

    1. As the proud owner of a 1960’s key work on concrete –Maritz Vandenbergh’s “Hard Artas-ua.info In Concrete”, and lover of bush-hammered vertical fins on some concrete motorway bridge abutments, I admire the exposed aggregate beauties of that era, but am looking forward to seeing some of these modern techniques mentioned in the blog above.

      However, in our damp climate, smooth and brushed concrete in the open can look stained and very ugly after just a few years, if the designer has not thought about the way water dripping or running down a surface causes staining. Water dripping off inadequate overhangs, resulting in vertical streaks and staining is typically seen on buildings if parapet copings are badly designed, and shed water the wrong way (across the face of walls rather than backwards out of sight to the roof and decks) , and in examples where window ledges don’t extend far out enough from the face of the building. Vertical landscape features like free standing and retaining walls need to be designed to avoid the same problems.

      It’s great that use of concrete seems to be going through a Renaissance at present. I look forward to seeing some fine examples of the new techniques in designed landscapes, as a result.

    LEAVE A REPLY